MARCUS TRANSFORMERS QUALITY
We've been making energy efficient electrical transformers with the best prices for over 50 years.
For over 60 years of manufacturing a wide range of transformers and three generations of ownership, our philosophy has not changed. Our goal at Marcus has always been to provide the customer with the highest quality products and the best service in the industry. We know that there are no shortcuts to achieving this goal. Marcus proved to become an industry leader in the United States and Canada, manufacturing top quality electrical transformers. Among our notable achievements are new insulation materials to increase transformer life, unique magnetic cores to reduce sound levels, and over 40 percent annual energy savings compared to competitive makes. Today, our patented WATT+ PLUS TM technology which incorporates only pure electrolytic copper coil windings, is recognized as the new standard of power for the electrical transformer industry. This Marcus technology recovers the original cost of the transformer within a period of 5 years. Most importantly, energy consumption over a 24 hour period is comparable to utility grade pole mounted transformers. We're proud of the reputation we've earned for manufacturing quality products that deliver exceptional performance and savings. No other transformer outperforms a Marcus transformer. We Guarantee it.
Marcus Production Plant
1. Marcus Advanced WATT+ PLUS TM Technology
Maximum efficiency, lowest losses, trouble-free performance, longer life Long before the term ‘Green Energy’ came into vogue, we were making lighting and distribution transformers that significantly reduced power consumption for commercial and industrial users. Marcus advanced WATT+ PLUS manufacturing technology ensures maximum efficiency, lowest losses, trouble-free performance, and longer transformer life.
The unique oval shape of Marcus wound core construction, unlike other conventional transformers core construction, ensures that the flow of magnetic flux is carried in direction of cold-rolled grain-oriented steel for minimal core loss.
Unique Oval Wound Core
Marcus coils are wound with 100% pure electrolytic high conductivity copper for long, trouble-free transformer life and a less expensive life cycle. Although more expensive, copper is the best electrical conductor. Copper wound transformers don’t heat up so quickly, are more corrosion resistant and are easier to install than their aluminum equivalents, rendering them highly efficient with lower operating costs.
Marcus Transformer Coils
Marcus combined unique core design, copper windings, and new insulation material ensure maximum electrical energy efficiency and reduced electricity bills, leading to a faster payback period. Marcus transformers will guarantee over 40 percent annual energy savings compared to competitive makes.
Dollar Savings Graph
Voltages are clearly labeled to facilitate trouble-free connecting of line and load cables. All coil leads are directly brazed to terminal board studs to prevent heating and loosening.
Terminal Board
Marcus distribution transformers are manufactured with heatproof Class 220° C materials only and designed to operate well below the maximum allowable temperature of rise of 150° C.
To provide effective heat transfer, all our core and coil assemblies are double dipped in solvent-less, non-hygroscopic resin and baked thoroughly.
Anti-vibration isolators between the element and enclosure reduce vibration transfer to the surrounding structure, ensuring quieter operation.
Distribution transformers taps are all fastened to the primary terminal board and clearly labeled to enable fast and easy voltage adjustments (same point as last box "Easily Accessible Terminal Board"?) Wall and/or floor channels are included as standard accessories Dry-type transformers have integral anti-vibration cushions to reduce structural vibration transfer Industrial control transformers are bobbin-wound to facilitate heat transfer Industrial control transformers are bobbin-wound to facilitate heat transfer Control designs ensure nominal voltage accuracy under operating loads
2. Quality Control from Start to Finish
Only the highest quality materials are ever used in all our products. Every component in a Marcus transformer is made with strict quality control and is thoroughly tested during manufacture assembly and upon completion. Each unit must meet our rigid inspection and test requirements before it is shipped. ll Marcus products utilize the most modern automated manufacturing facilities available. Our trained and experienced staff ensures that the highest quality criterion is maintained at all our facilities. We are dedicated to the highest level of service and quality at competitive prices. Meeting Standard Agency Approval: Marcus Transformer models meet the following agency standards (where applicable): UL, CSA, CUL, CE.
Marcus Industrial Control Production Plant
Testing Procedures and Certifications
A. Plants #1 & #2 Marcus testing laboratories have been granted a certificate of qualification as a manufacturer, testing for certification programs by CSA and therefore are compliant with ISO/IEC – 17025 to evaluate and manufacture products to applicable standards. This relates to the procedures, laboratory operating mode, standards and assembly quality control. Therefore, our management is fully committed that best practices regarding design, testing, workmanship and accuracy will be constantly and professionally achieved. This certification relates to the following areas and actions: standards list, data record procedure, test equipment control, non-conformance reports, notification, resumption of work, corrective and preventive action, internal audit and management, annual internal review and calibration program.
B. Plants #2  All transformers are subjected to routine prescribed tests at several stages during production to validate their designs, performance and reliable operation. The tests performed on the dry-type transformers are as follows: voltage ratio, polarity and phase relation, and dialectic (both applied and induced). The applied dielectric test or Hi-Pot test is performed at several critical times during production to ensure that the viability of the insulation system has not been compromised by mechanical forces.
C. Further type tests may be performed at the customer’s request, such as temperature rise, sound level, and leakage tests.
D. Customers may also request that tests be performed for special applications such as shipboard installations by the following agencies: Veritas (DNV, BV), Lloyds Register (LR), Coastguard (CCG, USCG), American Bureau of Shipping (ABS) or Maritime Coastguard Agency (MCA).
Material Quality Assurance
A. Purchasing: Marcus strives to ensure that there are several suppliers for each material required in production. This avoids unanticipated shipping delays and customer inconvenience. Whenever possible, local or domestic suppliers are preferred to avoid the complication of long supply chains and delays. Furthermore, face-to-face meetings promote better communications, understanding and accountability. All materials must be UL/CSA listed.
B. Receiving: When materials are received, close inspection reveals any packaging problems and damage such as water infiltration. This is especially important with insulation materials. Sample lots of magnetic wire and core steel are tested to ensure the material meets our high quality standards.
C. Storage: Although companies favor a just-in-time material flow, in reality there is always a period during which production raw materials mist be stored. At Marcus, we make certain that all goods received are stored in a clean and dry location to prevent any damage or deterioration.
3. Excellent Customer Care
As a family-owned concern, we take great pride in treating our customers with the respect and attention they rightfully deserve. We’re big enough to look after all your electrical transformer requirements, yet small enough to care... We carefully train our sales staff to help our customers choose the proper transformer for their application and help guide them through the order process. When engineering technical support is required, our highly qualified technical support group is there to help.
Aram and Rosemary helping one of our customers
Warranty
Marcus Trasformer of Canada Ltd. warrants that products of its manufacture shall be free from defects in workmanship or material under normal use or service provided that the transformer has not been subjected to incorrect voltage, frequency, overload, improper ventilation or improper use. For a period of one year from date of shipment, defective equipment will be repaired or replaced, free of charge, when returned F.O.B. factory of the Company. The Warranty is lieu of other warranties, expressed or implied, by the Company or its representatives and the said Warranty is also in lieu of legal Warranty or obligations or Warranty imposed by any law. The Company’s liability is limited strictly to repair or replacement of the Company’s products and no responsibility will be assumed for any consequential damages whatsoever and whether the same be conractual or delictual. At Marcus, we value your business and prove it with the highest quality, competitive prices, on-time delivery and expert technical assistance. Click here to see how Marcus compares to top transformer manufacturers in the region. We hope that you too will join the many satisfied users who choose Marcus transformers for a wide variety of applications.
Contact Marcus Transformer now!.